Z-Wave Plus TKB Home Roller Shutter Controller
Controller for all blinds, awnings, garage doors and gates
- Wireless control of any AC Motor
- Precise positioning of blind or awning
- Automatic calibration
- Monitor and analyse energy usage
The in-wall Roller Shutter Controller is designed to switch rise/lower roller shutter connected to its terminals using radio waves, controllers and a push button directly connected to this Roller Controller.
This in-wall Roller Shutter Controller is a transceiver which is a Z-Wave Plus™
enabled device and is fully compatible with any Z-Wave™ enabled network. Slim design let the Controller can easily hide itself into the wall box and that will be good for the house decoration.
The new smart relay calibration technology can reduce the inrush current caused by the load and let the module work perfectly with many kind of Roller Shutter.
This in-wall Roller Shutter Controller is able to detect position of the Shutter by using the patterned power measuring method, so it can be remote controlled not only fully up or down, but also can be adjusted to ex. 30% or 50%. And when manual controlled by push button, the controller also can memorize the position and send the new shutter position to its controller (ex. IP-Gateway).
The better the wireless range, the more reliable the product, and device offers a class-leading antenna. Optimised for reliability, this tiny unit can wireless communicate over 150 metres.
The best antenna. The best Z-Wave. Device is built upon Z-Wave Plus and leading Gen5 technology to offer you the fastest response times and optimal battery life between recharges.
If you’re using a sensor for security you want its communication to be secure. That’s why unit utilises AES-128 wireless data encryption to keep it secure from prying eyes and hackers.
Whether used for home intelligence or security, you want your device to always stay up to date. Whenever firmware udpdates are made for it, you’ll be able to upgrade unit via Microsoft Windows or select Z-Wave gateways.
- MODEL NUMBER
- Z-Wave Chip 500 series
- COMMUNICATION PROTOCOLS
- Z-Wave Plus
- Auto calibration
- Auto feedback the roller shutter position
- Type of supported motor: single-phase AC motors
- Supported limit switches type: electronic and mechanic
- Connected motor’s current and historical power consumption measured
- LED AND BUTTONS
- LED indicator
- Include/Exclude button
- ASSOCIATION GROUP
- One group and one device (nodes)
- MAXIMUM CURRENT
- 5A for lamps and resistive loads
- 1.7A for motors with compensated power factor (inductive loads)
- MAXIMUM LOAD
- 1100W (Resistive loads)
- 400W (Inductive loads)
- OVERLOAD PROTECTION
- Overload protection
- 47.5 x 39 x 15.6 mm (LxWxH)
- FCC, DEKRA, Z-Wave
- POWER SUPPLY
- Input: AC 100-240VAC, 50-60Hz
- POWER CONSUMPTION
- up to 0.8W
- RADIO SIGNAL POWER
- up to 1mW
- up to 50m (outdoors) and 40m (indoors)
- OPERATIONAL TEMPERATURE
- FOR INSTALLATION IN BOXES
- D ≥ 50mm, depth ≥ 60mm
- User manual
- Z-Wave Alliance
- Manual (RUS)
- Manual (ENG)
- Manufacturer manual
- Guides (RUS)
- Guides (ENG)
- Manufacturer guides
|Z-Wave Hardware Platform||ZM5202|
|Z-Wave Library Type||Enhanced 232 Slave|
|Z-Wave Device Type||Window Covering - Pos/End Aware|
|Z-Wave Role Type||Always On Slave|
|Blind features||Shutter calibration|
|Switch/Control Type||Push-button, Toggle , Rocker, Without LED|
|Power source||Cable AC|
|Form factor||Wall Mounted|
|OTA Firmware Updating||Yes|