Z-Wave Plus Aeotec Nano Shutter

In stock
SKU
AEO_ZW141
As low as $64.19
  • Precise motor positioning
  • Integrates shutters, shades, skylights, gates, etc. into Z-Wave network
  • Voltage: 120VAC - 240VAC, 50Hz - 60Hz
  • Total current amperage: 2x 2.5A
  • Wireless technology: Z-Wave Plus

Nano Shutter.

Your home’s motor controls connected to Z-Wave.

From security shutters to skylights, motorised electronics and furnishings are part of a modern home. Now they can be part of your connected home.

z-wave motor controller

Nano Shutter integrates with motors and converts them to Z-Wave. Instantly, whatever they’re connected to can be wirelessly controlled and intelligently automated with Nano Shutter able to integrate with a broad selection of devices.

Simple to install.
Simple to control.

Nano Shutter connects to your home’s existing motor controlled accessories. It does so simply, and it immediately makes those accessories available for control, automation and scheduling via Z-Wave.

It can be wired to connect directly to the motor itself. It can be wired to any existing wall switch that controls the motor. And it can be connected in seconds to WallSwipe, allowing you to further enhance Nano Shutter to have touch and gesture control.

Once installed, you can control Nano Shutter via any connected switch, and via Z-Wave through your gateway, remotecontrol, and smartphone app.

ledbulb6-app-control ledbulb6-direct-control ledbulb6-sched-control ledbulb6-responsive-control

App control.

Switch control.

Schedule control.

Responsive control.

Crafted with experience.

Nano Shutter is crafted from the same 10 years’ experience that has been infused into Nano Dimmer and Nano Switch. Experience that includes the engineering of Z-Wave’s first motor and shutter controller; Micro Motor Controller.

Building upon that experience, Nano Shutter offers 3 new enhancements crucial to such technology.

S2

Best security.
For any motor that controls access points, such as gates and security shutters, Z-Wave S2 is crucial. S2 enhances Nano Shutter with next-generation anti-hacking features including AES-128 bit encryption and ECDH key exchange.

z-wave

Z-Wave Plus.
Complementing its best-in-class security is Nano Shutter’s Z-Wave Plus. The latest version of Z-Wave, it allows Nano Shutter to control connected accessories with a 250% faster response time and a 67% greater wireless range that’s up 150 metres / 492 feet wide.

60 percent

Crafted to be simple to install, Nano Switch has also been crafted to be easier to install. At only 1.7” x 0.8”, it’s 60% smaller than Micro Motor Controller meaning that it’s even easier to install in behind motor switches.

Wireless range

The better the wireless range, the more reliable the product, and device offers a class-leading antenna. Optimised for reliability, this tiny unit  can wireless communicate over 150 metres.

Gen5

The best antenna. The best Z-Wave. Device is built upon Z-Wave Plus and leading Gen5 technology to offer you the fastest response times and optimal battery life between recharges.

Secure security

If you’re using a sensor for security you want its communication to be secure. That’s why unit utilises AES-128 wireless data encryption to keep it secure from prying eyes and hackers.

Wireless updates.

Whether used for home intelligence or security, you want your device to always stay up to date. Whenever firmware udpdates are made for it, you’ll be able to upgrade unit via Microsoft Windows or select Z-Wave gateways.

Technical Specification

  • MODEL NUMBER
    • ZW141
  • HARDWARE
    • Z-Wave Chip 500 series
  • COMMUNICATION PROTOCOLS
    • Z-Wave Plus
  • FEATURES
    • Auto calibration
    • Auto feedback the roller shutter position
    • Type of supported motor: single-phase AC motors
    • Supported limit switches type: electronic and mechanic
    • Connected motor’s current and historical power consumption measured
  • LED AND BUTTONS
    • LED indicator
    • Include/Exclude button
  • ASSOCIATION GROUP
    • Two groups and one device (nodes)
  • MAXIMUM CURRENT
    • 2.5A for lamps and resistive loads
    • 1.0A for motors with compensated power factor (inductive loads)
  • MAXIMUM LOAD
    • 1100W (Resistive loads)
    • 400W (Inductive loads)
  • OVERLOAD PROTECTION
    • Overload protection
  • DIMENSIONS
    • 47.5 x 39 x 15.6 mm (LxWxH)
  • CERTIFICATIONS
    • FCC, DEKRA, Z-Wave
  • POWER SUPPLY
    • Input: AC 100-240VAC, 50-60Hz
  • POWER CONSUMPTION
    • up to 0.8W
  • RADIO SIGNAL POWER
    • up to 1mW
  • RANGE
    •  up to 50m (outdoors) and 40m (indoors)
  • OPERATIONAL TEMPERATURE
    • 0-40°C
  • FOR INSTALLATION IN BOXES
    • D ≥ 50mm, depth ≥ 60mm

Package content

  • Unit
  • User manual

Z-Wave Specification

Z-Wave Association Capabilities

Model: Nano Shutter (ZW141-C)

Z-Wave Certification Number: ZC10-18066132


Group ID

Maximum Nodes

Description

1 5 Z-Wave Plus Lifeline. When the load state of Nano Shutter (turn on/off the load) is changed, the Basic Report (configured by parameter 80) can be sent to the associated nodes in this group.
2 5 Forward the Basic Set, Binary Switch Set, Scene Activation Set to associated nodes in Group 2 when the Nano Shutter receives the Basic Set, Binary Switch Set, Scene Activation Set commands from main controller. (E.g. Send/forward Basic Set to control the other nodes in association Group 2)

Z-Wave Configuration Capabilities

Model: Nano Shutter (ZW141-C)

Z-Wave Certification Number: ZC10-18066132


Parameter Number

Parameter Size

Parameter Name

Parameter Values

120 1 Configure the external switch mode for S1. 0
(Default)
Unidentified mode
  1 Reserved
  2 3 way switch mode
  3 Momentary push button mode
  4 Enter automatic identification mode

Parameter Number

Parameter Size

Parameter Name

Parameter Values

121 1 Configure the external switch mode for S2. 0
(Default)
Unidentified mode
  1 Reserved
  2 3 way switch mode
  3 Momentary push button mode
  4 Enter automatic identification mode

Parameter Number

Parameter Size

Parameter Name

Parameter Values

252 1 Lock/unlock configuration parameters 0
(Default)
Unlock
  1 Lock

Parameter Number

Parameter Size

Parameter Name

Parameter Values

255 4 Reset the Nano Shutter 0
(Default)
Reset all configuration parameters to factory default setting
  1431655765 Reset to factory default setting and removed from the z-wave network

Parameter Number

Parameter Size

Parameter Name

Parameter Values

35 1 Set the moving time from up (left) to down (right) for curtain. 1 to 127
(Default)
The available range for time set is 1 to 127 seconds.

Parameter Number

Parameter Size

Parameter Name

Parameter Values

80 1 To set which notification would be sent to the associated devices (Group 1) 0
(Default)
Send Nothing
  1 Send Basic CC report

Parameter Number

Parameter Size

Parameter Name

Parameter Values

85 1 Set the operation mode of external switch 0 Operation Mode 1
  1
(Default)
Operation Mode 2

Z-Wave Command Classes

Model: Nano Shutter (ZW141-C)

Z-Wave Certification Number: ZC10-18066132


Supported Command Classes
 
        Association Group Information V1
        Association V2
        Basic V1
        Binary Switch V1
        Configuration V1
        Device Reset Local V1
        Firmware Update MD V4
        Manufacturer Specific V2
        Multilevel Switch V3
        Powerlevel
        Scene Activation
        Scene Actuator Configuration
        Security S2
        Security V1
        Supervision
        Transport Service V2
        Version V2
        Z-Wave Plus Info V2
 
 
Controlled Command Classes
 
        Basic V1
        Binary Switch V1
        Hail

User manual

Guides

Discussions

More Information
Technology Z-Wave+
Z-Wave Plus: Yes
Z-Wave Hardware Platform ZM5202
Z-Wave Library Type Enhanced 232 Slave
Z-Wave Device Type Window Covering - Pos/End Aware
Z-Wave Role Type Always On Slave
Внутренняя/наружная установка Indoor
Manufacturer Aeotec
Association groups 2
Z-Wave Features Run Scene, Multilevel
Blind features Shutter calibration
Switch/Control Type Push-button, Toggle , Rocker, Without LED
Power source Cable AC
Maximu Load 2.5A
Form factor Wall Mounted
Usage Windows Blinds
OTA Firmware Updating Yes
Write Your Own Review
You're reviewing:Z-Wave Plus Aeotec Nano Shutter
Your Rating
Copyright © 2016 Swinestudio. All rights reserved.