Z-Wave Plus NEO Electronics Multi Sensor (Motion, Temperature, Lighting)

In stock
SKU
NEO_NAS-PD01Z2
$52.64
  • Use passive IR sensor to detect what is moving.
  • When PIR is triggered, LED lights would flash red color and send alerts.
  • Measure level of lighting and temperature.
  • Easily installed with screws or sticker on wall or table.
  • When there are people or animals that are moving within PIR detection area, PIR will send alarm messages to Z-Wave gateway.
  • Compatible with any Z-Wave gateway.

Motion sensor (PIR) is a passive infrared detector or physical sensor.  This sensor doesn’t emit any energy but only passively receive and detect infrared radiation from outside. It also measures lighting and temperature.
Under room temperature, all items have radiation. Human beings are warm-blooded animals with stable infrared radiation, so are most easily to be detected. That’s why we also call it body sensor. PIR send messages via Z-Wave network to Z-Wave gateway. In the Z-Wave network communications, PIR can be connected to any Z-Wave gateway. Different countries or areas, the radio frequency is different. In the communication between PIR and Z-Wave gatwway, PIR can only send messages, not be able to receive
messages. When PIR is triggered, PIR will send message to Z-Wave gateway, and associate devices to work through ZWave gateway. PIR is battery powered, is small and can be installed easily.

z-wave neo pir sensor

z-wave neo pir sensor

z-wave neo pir sensor

z-wave neo pir sensor

z-wave neo pir sensor

Wireless range

The better the wireless range, the more reliable the product, and Motion Sensor offers a class-leading antenna. Optimised for reliability, this tiny sensor can wireless communicate over 150 metres / 492 feet.

Gen5

The best antenna. The best Z-Wave. Motion Sensor is built upon Z-Wave Plus and Gen5 technology to offer you the fastest response times and optimal battery life between recharges.

Secure security

If you’re using a sensor for security you want its communication to be secure. That’s why Motion Sensor utilises AES-128 wireless data encryption to keep it secure from prying eyes and hackers.

Wireless updates.

Whether used for home intelligence or security, you want your sensor to always stay up to date. Whenever firmware udpdates are made for it, you’ll be able to upgrade Motion Sensor  via Microsoft Windows or select Z-Wave gateways.

technical-specifications

Technical Specification

  • MODEL NUMBER
    • NAS-PD01Z
  • HARDWARE
    • Z-Wave Chip 500 series
  • COMMUNICATION PROTOCOLS
    • Z-Wave Plus
  • Z-WAVE GROUPS
    • Four group and five devices (nodes)
  • DETECTION
    • PIR
    • LIGHTING
    • TEMPERATURE
  • DIMENSIONS
    • Packing size: (LxWxH)
    • Base size: 45mm x 45mm x 48mm (LxWxH)
  • CERTIFICATIONS
    • CE, Z-Wave
  • POWER SUPPLY
    • CR123A x 1
  • POWER CONSUMPTION
    • up to 1W
  • RADIO SIGNAL POWER
    • up to 1mW
  • RANGE
    •  up to 150m (outdoors) and 100m (indoors)
  • OPERATIONAL TEMPERATURE RANGE
    • 0-40°C  
  • OPERATIONAL HUMIDITY: 
    • 80%
  • MAX MOTION SENSIVITY
    • 7 metres, 110°
  • IP CODE
    • IP20

Package content

  • Unit:
    • Motion sensor
    • Holder
    • Battery
    • Screw (x2)
    • Screw stopper (x2)
    • Sticker
  • User manual

Z-Wave Specification

Z-Wave Association Capabilities

Model: Motion Sensor (PIR) (NAS-PD01ZE)

Z-Wave Certification Number: ZC10-16105298


Group ID

Maximum Nodes

Description

1 4 GROUP 1 is lifeline service that assigned to Sensor (Motion detector) status – Open/Close. It enables the sensor to send reports and readings to Z‐Wave Controller or Z‐Wave Gateway whenever the sensor is triggered. This Group Support: NOTIFICATION_REPORT_V4 SENSOR_BINARY_REPORT_V2 SENSOR_MULTILEVEL_REPORT_V7 BATTERY_REPORT DEVICE_RESET_LOCALLY_NOTIFICATION
2 4 GROUP 2 allows for sending control commands to associated devices such as relay module, lighting, etc. This association group is configured through the advanced parameters no. 2, 3, 5 and 8. This Group Support: BASIC_SET
3 4 GROUP 3 allows for Send Notification to associated devices in this group. This Group Support: NOTIFICATION_REPORT_V4
4 4 GROUP 4 allows for Send Sensor Binary Report to associated devices in this group. This Group Support: SENSOR_BINARY_REPORT_V2

Z-Wave Configuration Capabilities

Model: Motion Sensor (PIR) (NAS-PD01ZE)

Z-Wave Certification Number: ZC10-16105298


Parameter Number

Parameter Size

Parameter Name

Parameter Values

1 1 Sensitivity Level Setting 8 to 255
(Default)
unsigned

Parameter Number

Parameter Size

Parameter Name

Parameter Values

10 1 Led Blink Enable 0 to 1
(Default)
unsigned

Parameter Number

Parameter Size

Parameter Name

Parameter Values

2 2 On/Off Duration Setting 5 to 600
(Default)
second . unsigned

Parameter Number

Parameter Size

Parameter Name

Parameter Values

3 1 Basic Set Level 0 0, 1 ~ 99 or 255 0 – OFF, Alarm cancelling or turning a device off 1 ~ 99 or 255 – ON (Binary Switch Device) Dim Level (Multilevel Switch Device)

Parameter Number

Parameter Size

Parameter Name

Parameter Values

4 1 Enabled/Disabled PIR Function 0 – Disable PIR Detector Function. unsigned
  255
(Default)
– Enable PIR Detector Function. unsigned

Parameter Number

Parameter Size

Parameter Name

Parameter Values

5 2 Lux Level Set 0 to 1000
(Default)
Lux .unsigned

Parameter Number

Parameter Size

Parameter Name

Parameter Values

6 1 Re‐trigger Interval Setting. 1 to 8
(Default)
second .unsigned

Parameter Number

Parameter Size

Parameter Name

Parameter Values

7 2 Light Sensor Polling Interval 60 to 36000
(Default)
second .unsigned

Parameter Number

Parameter Size

Parameter Name

Parameter Values

8 1 Lux Level Enable 0 to 1
(Default)
unsigned

Parameter Number

Parameter Size

Parameter Name

Parameter Values

9 2 Lux Level Report 0 to 255
(Default)
Lux. unsigned

Z-Wave Command Classes

Model: Motion Sensor (PIR) (NAS-PD01ZE)

Z-Wave Certification Number: ZC10-16105298


Supported Command Classes
 
        Association Group Information V1
        Association V2
        Battery V1
        Configuration V1
        Device Reset Local V1
        Manufacturer Specific V2
        Notification V4
        Powerlevel
        Sensor Binary V2
        Sensor Multilevel V7
        Version V2
        Wake-Up V2
        Z-Wave Plus Info V2
 
 
Controlled Command Classes
 
        Basic V1

User manual

Guides

  • Guides
More Information
EAN No
Technology Z-Wave+
Z-Wave Plus: Yes
Security S2 Classes No
Z-Wave Hardware Platform ZM5202
Z-Wave Library Type Routing slave
Z-Wave Device Type Notification Sensor
Z-Wave Role Type Reporting Sleeping Slave
Association groups 4
Frequency N/A
Manufacturer NEO Electronics
Type of sensor motion, temperature, illuminance
Sensor Feature No
Z-Wave Features Power Level
Signal Inputs No
Signal Outputs No
Внутренняя/наружная установка Indoor
Power source Battery
Battery Type CR 123
Form factor Wall Mounted
Usage Control Lighting, Detect Activity, Monitor Weather
OTA Firmware Updating Yes
Write Your Own Review
You're reviewing:Z-Wave Plus NEO Electronics Multi Sensor (Motion, Temperature, Lighting)
Your Rating
Copyright © 2016 Swinestudio. All rights reserved.