Z-Wave Plus Aeotec Nano Switch with Energy Metering

In stock
SKU
AEO_ZW116
$62.54

Single Relay switch module to control loads up to 10A.

  • Enables Z-Wave control of lights and appliances
  • Very small size enables modules to fit into standard switch boxes (45mm recommended)
  • Enable for the connection of touch panel
  • Supports SPDT (Single-Pole Double-Throw) switches
  • Supports the DC24V power input
  • Monitors power consumption

Nano Switch.

Control any switch.
From anywhere. 
Wirelessly.

Power sockets and light switches: amazing inventions. They literally changed the world. But if you’re not standing right next to them or can’t reach them, they’re limited.

No more. The future is smarter. So is your home. Nano Switch offers complete wireless control of your switches and sockets.

aeotec nano switch

Total control.

zwave in wall switch

Nano Switch offers total control, easily. Impossibly small, each Nano Switch installs invisibly behind any of your home’s existing switches or power sockets. Simply unscrew the faceplate, install Nano Switch behind it, and you now have complete wireless control. Your old switches are instantly modern and instantly connected.

Nano Switch is a part of Aeotec’s Z-Wave switch and dimming range and is compatible with light switches and power outlets.

z-wave controller compatible with power sockets
power outlet nano switch light switch
Power outlets.
Turn your electronics off in the event of an emergency or a hazard. Smart Switch 6 lets you automatically turn off devices, such as leaking air conditioners and fridges, when then fail.
Light switches.
Monitor and understand exactly how much money the devices plugged into Smart Switch 6 are costing you to run, then create a schedule to reduce your electricity bill.

Total ability.

Once installed behind a switch or socket, Nano Switch offers unparalleled wireless control via Z-Wave Plus. It lets you control, automate, and monitor your lights light and power sockets. From anywhere. Anytime. And it does it all through enhancement – with Nano Switch, your sockets and switches don’t have to be replaced and they’ll continue to offer the same manual control that you’re used to.

schedule lights wirelessly

Automation and scheduling.

z-wave electricity monitoring

Energy metering.

app power outlet

Remote control.

replace wall switch with z-wave switch

Existing control.

Total home.

Nano Switch is a tool. Installed it minutes, it lets you control, monitor, automate, and schedule the electronics in your home. There’ll be the electronics you use every day; your lights, appliances and entertainment systems. But there’ll also be the electronics that become a part of your smart home as it grows; security and safety devices, electronics indoors and out. If there’s a reason to automate it, to monitor it or make it responsive, Nano Switch is the invisible, controlling, and responsive touch.


z-wave heater on

Twice the control.
Dual Nano Switch.

z-wave socket

Look around your home. Some lights have more than one switch. Some power outlets have more than one socket. For double gang outlets and switches, there’s Dual Nano Switch. Wire it into two switches or sockets for twice the control, twice the energy monitoring, and control of up to 5 amps / 1150 watts per switch channel.

What it doesn’t do.

Nano Switch is incredibly powerful and it’s been designed to control a lot of power. To be this small and control so much, it can’t offer every possible feature. Fully compatible with standard indoor and outdoor bulbs, there are two major things that Nano Switch can’t do: dim lights and work without a neutral wire. But perfect lighting is still only a touch away with Aeotec’s lighting-design focussed Nano Dimmer.


nano switch light bulbs

Works with any
socket or switch.

smartthings power outlet

But what it does do is work with any socket or switch in your home. Nano Switch doesn’t change how your home looks by changing your switches, it changes how your home feels by making it far more capable. Nano Switch works with your existing switches and sockets, can be controlled and scheduled by a Z-Wave gateway and app, and can be controlled by other Z-Wave devices including WallMote and WallSwipe.

nano switch wiring

Perfectly small.

Nano Switch installs behind your home’s switches or sockets. To do that, Nano Switch has to be small. Really small. It is.

60% smaller than the first Micro Smart Switch that Aeotec pioneered, and measuring only 19.5mm / 0.77” in depth, Nano Switch has been designed to be easily installed into even the smallest of junction boxes behind a switch or outlet.

aeotec micro smart switch

Micro Smart Switch
52 x 49 x 18 mm

aeotec micro smart switch 2e

Micro Smart Switch 2E
51.4 x 49.8 x 18.5 mm

aeotec nano switch

Nano Switch
43.5 x 39 x 19.5 mm




aeotec nano switch design

Perfectly safe.

Nano Switch installs behind your home’s switches or sockets. To do that, Nano Switch has to be small. Really small. It is.

60% smaller than the first Micro Smart Switch that Aeotec pioneered, and measuring only 19.5mm / 0.77” in depth, Nano Switch has been designed to be easily installed into even the smallest of junction boxes behind a switch or outlet.

nano switch surge production

Inbuilt surge
protection.

nano switch wireless encryption

AES-128 bit
wireless encryption.

Perfectly upgraded.

z-wave powerf control

Powerful control.
Designed to control sockets, switches and non-dimming lights powerfully. Nano Switch can control up to 15 amps of power while Dual Nano Switch can control up to 10 amps. See listing for full specs.

nano switch safely small

Safely small.
Designed to fit behind a wall switch without compromising on safety, Nano Switch measures a slender 4.2cm x 4cm x 2.5cm (1.65” x 1.6” x 0.98”) while Dual Nano Switch offers twice the control at only 4.4cm x 4cm x 2.5cm.

z-wave electricity monitoring

See your spend.
It powers automation and scheduling, and it also monitors energy monitor. Nano Switch comes in an edition infused with Aeotec’s super-accurate energy metering technology which records electricity use with 99% accuracy.

gen5

Gen5.
Nano Switch is a part of Aeotec’s Gen5 range and is engineered upon the latest version of Z-Wave – Z-Wave Plus. From lower power consumption to a 250% faster response time, Nano Switch is laden with benefits you’ll never see, only feel.

nano switch strong signal

Stronger signal.
Without using any more energy, Nano Switch offers greater wireless reliability than all before it. Its wireless signal is now +2.5dBM more powerful so that Nano Switch can offer a 50% greater wireless range that’s up 150 metres / 492 feet wide.

nano switch wireless update

Wireless updates.
Technology changes and Nano Switch changes with it. Unlike previous models, Nano Switch allows for firmware updates to be wirelessly installed via Z-Wave Plus so that it remains at the cutting edge.

nano switch safe wiring

Safe wiring.
Because of the high amps it carries and to avoid issues such as stray voltage Nano Switch only works with switches and outlets that utilise a neutral wire. Nano Dimmer is an alternative that works with or without a neutral wire.

nano switch easier wiring

Easier wiring.
It’s quicker to install and it’s also easier to wire. Now 60% smaller than previous in-wall switches, Nano Switch fits into even tighter spaces. It also connects to wires 25% thicker than past models.

nano switch secure control

Secure control.
Because of the power of Gen5, Nano Switch offers banking-grade, AES-128 bit encryption to protect the wireless communication that your connected home depends on and is run on.

schedule lights wirelessly

Full scheduling.
The power of Z-Wave means that Nano Switch can be intelligently automated. But it can also be scheduled to switch on and off on a timer independently, even when Z-Wave your gateway has connection issues.

z-wave din rail

DIN rail compatible.
Want to use it with a DIN rail? Pair Nano Switch with a generic DIN housing or module box for DIN rail compatibility and you’ll be able to use it with DIN rail systems.

z-wave 24VDC

Low voltage too.
Nano Switch is great with high voltage and low voltage. It can be used to control 24VDC electronics such as light strips, alarms, doorbells, and other low-powered devices.

Wireless range

The better the wireless range, the more reliable the product, and device offers a class-leading antenna. Optimised for reliability, this tiny unit  can wireless communicate over 150 metres.

Gen5

The best antenna. The best Z-Wave. Device is built upon Z-Wave Plus and leading Gen5 technology to offer you the fastest response times and optimal battery life between recharges.

Secure security

If you’re using a sensor for security you want its communication to be secure. That’s why unit utilises AES-128 wireless data encryption to keep it secure from prying eyes and hackers.

Wireless updates.

Whether used for home intelligence or security, you want your device to always stay up to date. Whenever firmware udpdates are made for it, you’ll be able to upgrade unit via Microsoft Windows or select Z-Wave gateways.

Technical Specification

  • MODEL NUMBER
    • ZW139
  • HARDWARE
    • Z-Wave Chip 500 series
    • Switching: 
  • COMMUNICATION PROTOCOLS
    • Z-Wave Plus
  • FEATURES
    • Power consumption measurement
    • Enable for the connection of touch panel
    • Supports SPDT (Single-Pole Double-Throw) switches
    • Supports the DC24V power input
  • LED AND BUTTONS
    • LED indicator
    • Include/Exclude button
  • ASSOCIATION GROUP
    • Four groups and five devices (nodes)
  • MAXIMUM CURRENT
    • 1 X 10A / 230VAC
    • 1 X 10A / 24VDC
  • MAXIMUM LOAD
    • 2300W (230VAC) (Resistive)
    • 240W (24VDC) (Resistive)
    • (Resistive-Inductive)
    • (Resistive-Capacitive)
  • POWER MEASUREMENT
    • Power measurement accuracy+/-3W
  • OVERCURRENT PROTECTION
    • Required external circuit breaker
  • DIMENSIONS
    • Package: 50 x 50 x 22 mm (LxWxH)
    • Unit: 42.5 x 40 x 20 mm (LxWxH)
  • CERTIFICATIONS
    • FCC, Z-Wave
  • POWER SUPPLY
    • AC 120-240VAC, 50-60Hz
    • 24 VDC
  • POWER CONSUMPTION
    • up to 0.8W
  • RADIO SIGNAL POWER
    • up to 1mW
  • RANGE
    •  up to 50m (outdoors) and 40m (indoors)
  • OPERATIONAL TEMPERATURE
    • 0-40°C
  • OPERATIONAL  HUMIDITY
    • 8-80%
  • FOR INSTALLATION IN BOXES
    • D ≥ 60mm, depth ≥ 60mm
  • IP CODE
    • IP20
  • WEIGHT
    • Net: 28 g 
    • Gross: 34 g

Package content

  • Unit
  • User manual

Z-Wave Specification

Z-Wave Association Capabilities

Model: Nano Switch (ZW139-C)

Z-Wave Certification Number: ZC10-17035523


Group ID

Maximum Nodes

Description

1 5 Z-Wave Plus Lifeline. When the load state of Nano Switch (turn on/off the load) is changed, the Hail CC and Basic Report (configured by parameter 80) can be sent to the associated nodes in this group.
2 5 Forward the Basic Set, Switch All, Scene Activation Set to associated nodes in Group 2 when the Dual Nano Switch receives the Basic Set, Switch All, Scene Activation Set commands from main controller. (E.g. Send/forward Basic Set to control the other nodes in association Group 2)
3 5 Send Basic Set (configured by parameter 0x51 ) to the associated nodes in Group 3 when the external switch S1 is operated. Note: The Switch Mode of external switch S1 should be identified successfully, which means that the value of Configuration parameter 0x78 should be non-zero, then the Basic Set can be sent to the associated nodes in Group 3 via triggering the S1 switch.
4 5 Send Basic Set (configured by parameter 0x52) to the associated nodes in Group 4 when the external switch S2 is operated. Note: The Switch Mode of external switch S2 should be identified successfully, which means that the value of Configuration parameter 0x79 should be non-zero, then the Basic Set can be sent to the associated nodes in Group 3 via triggering the S2 switch.

Z-Wave Configuration Capabilities

Model: Nano Switch (ZW139-C)

Z-Wave Certification Number: ZC10-17035523


Parameter Number

Parameter Size

Parameter Name

Parameter Values

120 1 Configure the external switch mode for S1. 2 3 way switch mode
  0
(Default)
Enter automatic identification mode
  1 2-state switch mode
  3 Momentary push button mode

Parameter Number

Parameter Size

Parameter Name

Parameter Values

121 1 Configure the external switch mode for S2. 0
(Default)
Enter automatic identification mode
  1 2-state switch mode
  2 3 way switch mode
  3 Momentary push button mode

Parameter Number

Parameter Size

Parameter Name

Parameter Values

122 1 Set the control destination for external switch 1 control the output loads of itself.
  2 control the other nodes
  3
(Default)
control the output loads of itself and other nodes.

Parameter Number

Parameter Size

Parameter Name

Parameter Values

20 1 Configure the output status after re-power on it. 1 Always on
  0
(Default)
Last status
  2 Always off

Parameter Number

Parameter Size

Parameter Name

Parameter Values

252 1 Lock/unlock configuration parameters 0
(Default)
Unlock
  1 Lock

Parameter Number

Parameter Size

Parameter Name

Parameter Values

255 4 Reset the Nano Switch 1431655765 Reset to factory default setting and removed from the z-wave network
  0
(Default)
Reset all configuration parameters to factory default setting

Parameter Number

Parameter Size

Parameter Name

Parameter Values

4 1 Overheat protection. 0
(Default)
Disable
  1 Enable

Parameter Number

Parameter Size

Parameter Name

Parameter Values

80 1 To set which notification would be sent to the associated devices (Group 1) 0 Send Nothing
  1 Send Hail CC
  2 Send Basic Report CC
  3
(Default)
Send Hail CC when using the manual switch to change the load state.

Parameter Number

Parameter Size

Parameter Name

Parameter Values

81 1 To set which notification would be sent to the associated nodes in association group 3 0 Send Nothing
  1
(Default)
Send Basic Set CC

Parameter Number

Parameter Size

Parameter Name

Parameter Values

82 1 To set which notification would be sent to the associated nodes in association group 4 1
(Default)
Send Basic Set CC
  0 Send Nothing

Parameter Number

Parameter Size

Parameter Name

Parameter Values

83 1 Configure the state of LED when it is in 3 modes 0
(Default)
Energy mode. The LED will follow the status (on/off).
  2 Night light mode. The LED will remain ON state.
  1 Momentary indicate mode. When the state of Switch’s load changed, the LED will follow the status (on/off) of its load, but the LED will turn off after 5 seconds if there is no any switch action.

Parameter Number

Parameter Size

Parameter Name

Parameter Values

84 4 Set the ON/OFF time of the LED when it is in Night light mode. 0 to 60 The minute time of OFF
  256 to 316 The hour time of OFF
  65536 to 65596 The minute time of ON
  16777216 to 16777276 The hour time of ON

Parameter Number

Parameter Size

Parameter Name

Parameter Values

86 4 Set appointment 1 0 to 60 The minute value of ON time
  65536 to 65543 The day value (Mon to Sun)
  16777216 Enable the setting.
  256 to 316 The hour value of ON time
  16777215 Disable the setting.

Parameter Number

Parameter Size

Parameter Name

Parameter Values

87 4 Set appointment 2 256 to 316 The hour value of ON time
  65536 to 65543 The day value (Mon to Sun)
  16777215 Disable the setting.
  0 to 60 The minute value of ON time
  16777216 Enable the setting.

Z-Wave Command Classes

Model: Nano Switch (ZW139-C)

Z-Wave Certification Number: ZC10-17035523


Supported Command Classes
 
        All Switch
        Association Group Information
        Association V2
        Basic
        Clock
        Configuration
        Device Reset Local
        Firmware Update MD V3
        Manufacturer Specific V2
        Notification V4
        Powerlevel
        Scene Activation
        Scene Actuator Configuration
        Security
        Switch Binary
        Version V2
        Z-Wave Plus Info V2
 
 
Controlled Command Classes
 
        Basic
        Hail

User manual

Guides

More Information
EAN No
Z-Wave Plus: N/A
Security S2 Classes N/A
Z-Wave Hardware Platform ZM5101
Z-Wave Library Type Enhanced 232 Slave
Z-Wave Device Type On/Off Power Switch
Z-Wave Role Type Always On Slave
Technology Z-Wave+
Frequency N/A
Внутренняя/наружная установка Indoor
Manufacturer Aeotec
Association groups 4
Z-Wave Features Run Scene, Multichanel , Multichannel Association
Switch/Control Type Push-button, Toggle , Rocker, Without LED
Maximu Load 10A
Type of dimmer and switch insert module
Power source Cable AC, Power supply DC
Type of wire system 3-Wire
Type of insert module Relay - Single
Insert module feature Additional Inputs, Power Metering, DC Power Option, Accumulated Power Metering
Touch control options No
Form factor Wall Mounted
Usage Control Lighting
OTA Firmware Updating Yes
Write Your Own Review
You're reviewing:Z-Wave Plus Aeotec Nano Switch with Energy Metering
Your Rating
Copyright © 2016 Swinestudio. All rights reserved.