Z-Wave Plus Aeotec Nano Dimmer

In stock
SKU
AEO_ZW111
$64.19

Universal Z-Wave Flush Dimmer to control all types of light sources.

  • Enables Z-Wave control and dimming of your lights
  • Works with all bulb types
  • Works with LEDs, Halogens, CFL and Incandescent bulbs
  • Monitors power consumption

Nano Dimmer

Make all your lights smart lights. Simply.

Nano Dimmer dramatically improves the lighting in your home. Our 3rd generation of invisible lighting controller outperforms all that has come before it. Dimming is smoother. Compatibility is broader. Lighting is faster and more responsive. Automation and intelligence have never been more powerful. And it comes in such a small size, that you’ll be amazed at just how much functionality we were able to craft inside.

Perfect lighting is a part of every truly smart home. Lighting that is responsive. That is always the right brightness. That is always on when you need it, and off when you don’t. But perfect lighting has never been easy.

Instead, perfect lighting has been too complicated to achieve. In the past, to automate your lights with Z-Wave you’ve had to worry about the type of wiring you have, whether your lighting is trailing or leading edge, and whether you’re using TRIACs or thyristors. Far too complicated. Get any of those wrong and your connected lighting would quickly become a connected headache.

No more. Nano Dimmer offers smart, connected lighting without any of the hassle.

z-wave nano dimmer

lighbult in hand

Easy to install.

Nano Dimmer lets you add new and existing lights to your Z-Wave system. It makes your lights smarter. It makes them responsive. It gives you the ability to control them, schedule, dim them and brighten them.

All that control and intelligence comes from simply wiring Nano Dimmer behind an existing wall switch.

nano dimmer wiring with switch

The best wiring
compatibility yet.

lightbulb compatibilityLight bulb compatibility used to be complex. Now it’s never been easier.

Powered by both its dedicated Lighting Engine and a dedicated 32-bit CPU, Nano Dimmer calculates lighting at unparalleled speeds. It calculates perfectly smooth dimming, and it calculates perfect bulb compatibility, self-adjusting its settings whenever a new bulb is attached.

That means that you won’t ever have a problem finding lights that works with Nano Dimmer’s list of compatible bulbs.

nano-led nano-dimmable nano-cfl nano-flour nano-incand nano-halagon
LED Dimmable LED CFL Fluorescent Incandescent Halogen

And that’s a list that’ll keep on growing. Lighting Engine can be upgraded, meaning that new compatibility calculations are only ever a firmware upgrade away.

Neutral not required.

Nano Dimmer isn’t just better at lighting compatibility, it’s better at wiring compatibility too.

Whether your lights are installed in a 2-wire or 3-wire system, Nano Dimmer is compatible. Lighting Engine auto-detects whether your light switches have a neutral wire or not, then automatically adjusts it settings.

universal-wiring-icon work-natural-icon work-without-nat-icon
Universal wiring compatibility Works with neutral Works without neutral

Works with your existing light switch.

finger and light switchNano Dimmer has been designed to enhance your home, not to completely change it.

That is why it is been designed to work with most of the light switches typically found in homes, new or old. It installs invisibly behind them, enhancing their functionality instead of completely replacing it. Nano Dimmer can be connected to the following light switches;

light switch rocker switch pull switch push button switch wall switch
Toggle switch. Rocker switch. Pull-chain switch. Push-button switch. Wall switch.

Works without any switch at all.

z-wave plus lighting pack

When you enhance your lighting with Nano Dimmer, you do so with the connectivity of Z-Wave Plus. Connectivity that lets you intelligently automate it, connectivity that lets you responsively control it, and connectivity that lets you manage and monitor it even when you’re not home.

Smooth dimming.

Dimming the lights in a room is beautiful. But it’s also technical. It takes what is known as phase control; the reduction of the amount of voltage a light bulb consumes along its trailing edge or leading edge.

You don’t need to know any of that, because Nano Dimmer makes smart lighting simple. It simplifies the wiring, and it simplifies the dimming.Nano Dimmer is compatible with both leading edge and trailing edge.

And because smooth dimming is the definition of beautiful lighting, Nano Dimmer does it perfectly.

Whatever amount of light you need, Nano Dimmer delivers. It can dim your lights from between 0% and 100%. And it can dim them at perfect speed with Nano Dimmer offering an adjustable ramp rate allowing the brightness of your lights to adjust over moments or minutes.

Perfectly small.

The first Z-Wave in-wall dimmer? That was from Aeotec. We started engineering it in 2006 and then we followed up with the best-selling Micro Dimmer 2E. Now we’re replacing it with our all new Nano range.

To make an in-wall lighting controller this perfect means working from the ground up. But despite now being 60% smaller than our original technology, every single millimetre of Nano Dimmer benefits from our 10 year’s experience in making in-wall dimmers. That decade’s worth of expertise makes Nano Dimmer compact without compromise.

aeotec micro dimmer aeotec micro dimmer 2e aeotec nano dimmer
Micro Dimmer 52 x 49 x 18 inches Micro Dimmer 2E 51.4 x 49 x 18.5 mm Nano Dimmer 42 x 39. 5 x 20mm

Perfectly safe.

nano dimmer pcbYour lighting may be perfect, but that doesn’t mean the electricity powering it is. Things happen. Surges happen and are common, and Nano Dimmer protects against them. With a in-built surge and overload protector, Nano Dimmer not only keeps your lighting connected it keeps them protected.

nano-SurgeProtection universal-wiring-compatibility
Surge Protection Overload Protection





Perfectly upgraded.

Outdoor bulb

New lights, no problems.
Keep Nano Dimmer compatible and Lighting Engine up to date; Nano Dimmer’s firmware can be updated wirelessly.

Outdoor bulb

250% faster.
Your lighting should be quick and responsive. Nano Dimmer responds in milliseconds, changing your lights 250% quicker than past generations.

50,000 hours

Gen5.
The best Z-Wave. Nano Dimmer is built upon Aeotec’s leading Gen5 technology and is powered by the latest version of Z-Wave — Z-Wave Plus.

Outdoor bulb

No gateway, no worries.
With its auto timers and settings, Nano Dimmer can still be automated and controlled when your gateway is down.

180o beam

Dimming levels.
Perfect dimming needs precision. Nano Dimmer can be dimmed at 1% increments from 0% right through to 100% brightness.

Perfect distance

Smooth dimming.
Some people like instant lighting, others smooth dimming. Nano Dimmer offers a customisable ramp rate so that it can dim or brighten as fast or as smooth as you want it to.

pdated bulb

Fan control.
Control your lights and control your ceiling fans. Nano Dimmer can be wired to turn select ceiling fans as powerful as 100 watts on and off, and control their speeds.

Perfect distance

Lighting Engine.
Homes have unique lighting and switches. From bulb type to switch type to wiring type to load type, Lighting Engine powers Nano Dimmer’s class-leading dimming compatibility.

pdated bulb

1.5 amps.
Small in size without compromise. Nano Dimmer can control lights and loads that draw up to 1.5 amps of power.

Outdoor bulb

Wireless control.
Connected lighting has to work. It’s that simple. Nano Dimmer offers a leading 150 metre point-to-point wireless range for flawless wireless performance.

pdated bulb

Perfectly slim.
Packed with technology but not bloated in size, Nano Dimmer’s slim shell of just 20mm fits easily behind your homes existing wall switches.

70 watts

See your spend.
Along with control and dimming, Nano Dimmer includes Aeotec’s energy metering technology for an accurate measurement of how much electricity your lights are spending.

Perfect distance

Stronger signal.
A wireless signal that goes further, stronger. Nano Dimmer’s improved wireless technology is perfect for pass through walls now that it’s 2.5dBM stronger.

pdated bulb

DIN rail compatible.
Want to use it with a DIN rail? Pair Nano Dimmer with a generic DIN housing or module box for DIN rail compatibility and use.

pdated bulb

Secure lighting.
Because it’s built upon Z-Wave Gen5, Nano Dimmer features banking grade encryption perfectly suited to outdoor use.

Perfect with low voltage lights.

nano dimmer pcbHomes increasingly have low energy lighting that is hard to dim. But not for Nano Dimmer. It can even dim low power LEDs and CFLs that use less than 20 watts through the use of a bypass.

Also from our lighting range.

Nano Dimmer is completely compatible with these products.

nano-led-bulb

LED Bulb

nano-led-strip

LED Strip

nano-smart-dimmer

Smart Dimmer 6

nano-wallmate

WallMote

nano-switch

Nano Switch

Wireless range

The better the wireless range, the more reliable the product, and device offers a class-leading antenna. Optimised for reliability, this tiny unit  can wireless communicate over 150 metres.

Gen5

The best antenna. The best Z-Wave. Device is built upon Z-Wave Plus and leading Gen5 technology to offer you the fastest response times and optimal battery life between recharges.

Secure security

If you’re using a sensor for security you want its communication to be secure. That’s why unit utilises AES-128 wireless data encryption to keep it secure from prying eyes and hackers.

Wireless updates.

Whether used for home intelligence or security, you want your device to always stay up to date. Whenever firmware udpdates are made for it, you’ll be able to upgrade unit via Microsoft Windows or select Z-Wave gateways.

Technical Specification

  • MODEL NUMBER
    • ZW111
  • HARDWARE
    • Z-Wave Chip 500 series
    • Switching: 
  • COMMUNICATION PROTOCOLS
    • Z-Wave Plus
  • FEATURES
    • Support for the connection of touch panel
    • Power consumption measurement
    • Supports SPDT (Single-Pole Double-Throw) switches
  • LED AND BUTTONS
    • LED indicator
    • Include/Exclude button
  • ASSOCIATION GROUP
    • Four groups and five devices (nodes)
  • MAXIMUM CURRENT
    • 1.2 A / 230 VAC
  • MAXIMUM LOAD
    • 276 W (230 VAC) (Resistive)
    • (Resistive-Inductive)
    • (Resistive-Capacitive)
  • OVERCURRENT PROTECTION
    • required external circuit breaker
  • POWER MEASUREMENT
    • Power measurement accuracy: +/-3W.
  • DIMENSIONS
    • Package: 50 x 50 x 22 mm (LxWxH)
    • Unit: 42.5 x 40 x 20 mm (LxWxH)
  • CERTIFICATIONS
    • FCC, Z-Wave
  • POWER SUPPLY
    • AC 100-240VAC, 50-60Hz
  • POWER CONSUMPTION
    • up to 0.8W
  • RADIO SIGNAL POWER
    • up to 1mW
  • RANGE
    •  up to 50m (outdoors) and 40m (indoors)
  • OPERATIONAL TEMPERATURE
    • 0-40°C
  • OPERATIONAL  HUMIDITY
    • 8-80%
  • FOR INSTALLATION IN BOXES
    • D ≥ 60mm, depth ≥ 60mm
  • IP CODE
    • IP20
  • WEIGHT
    • Net: 28 g 
    • Gross: 34 g

Package content

  • Unit
  • User manual

Z-Wave Specification

Z-Wave Association Capabilities

Model: Nano Dimmer (ZW111-C)

Z-Wave Certification Number: ZC10-17015388


Group ID

Maximum Nodes

Description

1 5 Z-Wave Plus Lifeline. When the load state of Nano Dimmer (on/off/dim the load ) is changed, the Hail CC, Switch Multilevel Report and Basic Report (configured by parameter 80) can be sent to the associated nodes in this group.
2 5 Forward the Basic Set, Switch Binary Set, Switch Multilevel Start Level Change, Switch Multilevel Stop Level Change, Switch Multilevel Set, Switch all to the associated nodes in Group 2 when the Nano Dimmer receives the Basic Set, Switch Binary Set, Switch Multilevel Start Level Change, Switch Multilevel Stop Level Change, Switch Multilevel Set, Switch all commands from main controller.
3 5 Send Basic Set (configured by parameter 0x51 ) to the associated nodes in Group 3 when the external switch S1 is operated
4 5 Send Basic Set (configured by parameter 0x52) to the associated nodes in Group 4 when the external switch S2 is operated

Z-Wave Configuration Capabilities

Model: Nano Dimmer (ZW111-C)

Z-Wave Certification Number: ZC10-17015388


Parameter Number

Parameter Size

Parameter Name

Parameter Values

100 1 Set parameter 101-103 to default value. 0
(Default)
Reset the parameter 101-103

Parameter Number

Parameter Size

Parameter Name

Parameter Values

101 4 To set which reports need to be sent in Report group 1. 1 Send Meter Report of voltage (V)
  2 Send Meter Report of current (A)
  4 Send Meter Report of wattage (W)
  8 Send Meter Report of energy (kWh)

Parameter Number

Parameter Size

Parameter Name

Parameter Values

102 1 To set which reports need to be sent in Report group 2. 1 Send Meter Report of voltage (V)
  2 Send Meter Report of current (A)
  4 Send Meter Report of wattage (W)
  8 Send Meter Report of energy (kWh)

Parameter Number

Parameter Size

Parameter Name

Parameter Values

103 1 To set which reports need to be sent in Report group 3. 1 Send Meter Report of voltage (V)
  2 Send Meter Report of current (A)
  4 Send Meter Report of wattage (W)
  8 Send Meter Report of energy (kWh)

Parameter Number

Parameter Size

Parameter Name

Parameter Values

110 1 Set parameter 111-113 to default value. 0
(Default)
Reset the parameter 111-113

Parameter Number

Parameter Size

Parameter Name

Parameter Values

111 4 Set the interval of automatic report for Report group 1. 1 to 2147483647
(Default)
The range of interval time is 1 to 2147483647.

Parameter Number

Parameter Size

Parameter Name

Parameter Values

112 4 Set the interval of automatic report for Report group 2. 1 to 2147483647
(Default)
The range of interval time is 1 to 2147483647.

Parameter Number

Parameter Size

Parameter Name

Parameter Values

113 4 Set the interval of automatic report for Report group 2. 1 to 2147483647
(Default)
The range of interval time is 1 to 2147483647.

Parameter Number

Parameter Size

Parameter Name

Parameter Values

120 1 Configure the external switch mode for S1. 0
(Default)
Enter automatic identification mode
  1 Momentary push button mode
  2 3 way switch mode
  3 2-state switch mode

Parameter Number

Parameter Size

Parameter Name

Parameter Values

121 1 Configure the external switch mode for S2. 0
(Default)
Enter automatic identification mode
  1 Momentary push button mode
  2 3 way switch mode
  3 2-state switch mode

Parameter Number

Parameter Size

Parameter Name

Parameter Values

122 1 Get the state of touch panel port 0
(Default)
the touch panel is not connected.
  5 the touch panel is connected.

Parameter Number

Parameter Size

Parameter Name

Parameter Values

123 1 Set the control destination for external switch S1 1 control the output loads of itself.
  3
(Default)
control the output loads of itself and other nodes.
  2 control the other nodes

Parameter Number

Parameter Size

Parameter Name

Parameter Values

124 1 Set the control destination for external switch S2 1 control the output loads of itself.
  2 control the other nodes.
  3
(Default)
control the output loads of itself and other nodes

Parameter Number

Parameter Size

Parameter Name

Parameter Values

125 1 Set the default dimming rate. 1 to 255
(Default)
The value range is 1 to 255 seconds.

Parameter Number

Parameter Size

Parameter Name

Parameter Values

128 1 Get the current working mode 0
(Default)
Unknown working mode.
  1 2-wire mode
  2 3-wire mode

Parameter Number

Parameter Size

Parameter Name

Parameter Values

129 1 Set the dimming principle 0 Trailing edge mode
  1
(Default)
Leading edge mode

Parameter Number

Parameter Size

Parameter Name

Parameter Values

130 1 To get what type of load the Dimmer is connected to. 1 Resistive load
  2 Capacitive load
  3 Inductive load
  0
(Default)
Unknown load.

Parameter Number

Parameter Size

Parameter Name

Parameter Values

131 1 Set the min brightness level that the load can reach to. 0 to 99
(Default)
The level range is 0 to 99.

Parameter Number

Parameter Size

Parameter Name

Parameter Values

132 1 Set the max brightness level that the load can reach to. Note: 0 to 99
(Default)
The level range is 0 to 99.

Parameter Number

Parameter Size

Parameter Name

Parameter Values

20 1 Configure the output status after re-power on it. 0
(Default)
Last status
  2 Always off
  1 Always on

Parameter Number

Parameter Size

Parameter Name

Parameter Values

249 1 Set the recognition way of load 0 Never recognize the load when power on
  1 Only recognize once when first power on
  2
(Default)
Recognize the load once power on

Parameter Number

Parameter Size

Parameter Name

Parameter Values

252 1 Lock/unlock configuration parameters 0
(Default)
Unlock
  1 Lock

Parameter Number

Parameter Size

Parameter Name

Parameter Values

255 4 Reset the Nano Dimmer 0
(Default)
Reset all configuration parameters to factory default setting
  1431655765 Reset to factory default setting and removed from the z-wave network

Parameter Number

Parameter Size

Parameter Name

Parameter Values

3 1 Current Overload Protection. 1
(Default)
Enable
  0 Disable

Parameter Number

Parameter Size

Parameter Name

Parameter Values

4 1 Overheat protection. 0
(Default)
Disable
  1 Enable

Parameter Number

Parameter Size

Parameter Name

Parameter Values

80 1 To set which notification would be sent to the associated devices (Group 1) 1 Send Hail CC
  2 Send Basic CC report
  3 Send Multilevel Switch report
  0
(Default)
Send Nothing
  4 Send Hail CC when using the manual switch to change the load state.

Parameter Number

Parameter Size

Parameter Name

Parameter Values

81 1 To set which notification would be sent to the associated nodes in association group 3 1
(Default)
Send Basic Set CC
  0 Send Nothing

Parameter Number

Parameter Size

Parameter Name

Parameter Values

82 1 To set which notification would be sent to the associated nodes in association group 4 0 Send Nothing
  1
(Default)
Send Basic Set CC

Parameter Number

Parameter Size

Parameter Name

Parameter Values

85 4 Set appointment 1 16777215 to 16777222 The day value (Mon to Sun)
  256 to 316 The minute value of ON time
  65536 to 65560 The hour value of ON time
  0 to 99 The brightness level

Parameter Number

Parameter Size

Parameter Name

Parameter Values

86 4 Set appointment 2 0 to 99 The brightness level
  256 to 316 The minute value of ON time
  65536 to 65560 The hour value of ON time
  16777215 to 16777222 The day value (Mon to Sun)

Parameter Number

Parameter Size

Parameter Name

Parameter Values

90 1 Enables/disables parameter 91 and 92 below: 0
(Default)
Disable
  1 Enable

Parameter Number

Parameter Size

Parameter Name

Parameter Values

91 2 Set the threshold value of wattage. 0 to 60000
(Default)
The thershold value range is 0 to 60000

Parameter Number

Parameter Size

Parameter Name

Parameter Values

92 1 Set the threshold value of wattage. 0 to 100
(Default)
The thershold value range is 0 to 100

Z-Wave Command Classes

Model: Nano Dimmer (ZW111-C)

Z-Wave Certification Number: ZC10-17015388


Supported Command Classes
 
        All Switch
        Association Group Information
        Association V2
        Basic
        Clock
        Configuration
        Device Reset Local
        Firmware Update MD V3
        Manufacturer Specific V2
        Meter V3
        Notification V4
        Powerlevel
        Scene Activation
        Scene Actuator Configuration
        Security
        Switch Binary
        Switch Multilevel V3
        Version V2
        Z-Wave Plus Info V2
 
 
Controlled Command Classes
 
        Basic
        Hail

User manual

Guides

More Information
EAN N/A
Z-Wave Plus: N/A
Security S2 Classes N/A
Z-Wave Hardware Platform ZM5101
Z-Wave Library Type Enhanced 232 Slave
Z-Wave Device Type Light Dimmer Switch
Z-Wave Role Type Always On Slave
Technology Z-Wave+
Frequency N/A
Внутренняя/наружная установка Indoor
Manufacturer Aeotec
Association groups 4
Z-Wave Features Run Scene, Multilevel
Switch/Control Type Push-button, Toggle , Rocker, Without LED, Touch panel
Maximu Load 1.2A
Type of dimmer and switch insert module
Power source Cable AC
Type of wire system 2-Wire, 3-Wire
Type of insert module Dimmer
Insert module feature Power Metering
Touch control options N/A
Form factor Wall Mounted
Usage Control Lighting
OTA Firmware Updating Yes
Write Your Own Review
You're reviewing:Z-Wave Plus Aeotec Nano Dimmer
Your Rating
Copyright © 2016 Swinestudio. All rights reserved.