Z-Wave Plus Aeotec Garage Door Controller

In stock
SKU
AEO_ZW062
$102.14

The garage door is one of the most overlooked yet frequently used entrances to your home. Aeotec’s Garage Door Controller brings the intelligence of the connected-home and Z-Wave to it. Easily connected to your door’s existing motor, Garage Door Controller enhances it with a suite of security and safety sensors.


Always aware.
Monitor and control your garage door via a smart phone and an Internet connected Z-Wave hub from anywhere in the world.

Complete package.
Garage Door Controller comes with everything you need: the controller, a tilt sensor, and accessories.

Notifications.
Tilt sensor lets you receive notifications when your garage door is opened and shouldn’t be.

Entry log.
Keep a time log of when the garage door has been opened or closed, and receive remote notification when that happens.

Z-Wave inside.
Garage Door Controller is powered by Z-Wave Plus, Aeotec’s Gen5 technology and acts as a Z-Wave repeater.


Security controller.
Automatically set security cameras connected to your Z-Wave system to record when your door is opened or closed.

Smart controller.

The smart motor controller is 1 of the 2 parts that makes Garage Door Controller so powerful. Built upon Z-Wave, it connects to your garage door’s existing motor, and is brimming with control and safety features.


Smart control.
Control your garage door from a smart phone or any other Z-Wave controller.

Manual control.
Control your garage door manually via the smart controller’s central push button.

Safety first.
Controller includes a 105dB siren and LED lighting to warn of door closures.


Upload MP3 tones.
Customise the controller’s safety tones by uploading MP3s via USB.

Simple install.
Simply connects to your garage door’s existing motor via two cables.

Smart door.

Garage Door Controller doesn’t just allow you to control your garage door, it also allows you to check it. Whether used via the motor or manually, the smart sensor that comes with Garage Door Controller reads if the door is opened or closed, and can notify you when that happens and shouldn’t.


Wireless
Wirelessly communicates over 10m / 32’to report on your garage door’s open or closed status.

Installs easily.
Simple installation with screws/double sided tape.

Battery powered.
Cable free and powered by batteries that’ll last up to 2 years.

Tilt sensor.
The controller’s smart sensor has been designed to work with tilt sensors.


Fits easily.
At around 3 by 1 inches, the tilt sensor is small enough to fit on most doors.

Secure garage door.

Your garage door is an entry to your home and to your valuables. It needs to be secured. While some garage door motors are easily overridden or wirelessly hacked, Aeotec’s Garage Door Controller has been hardened to prevent such security issues.

128 bit encryption.
Powered by Aeotec’s Gen5 technology, Garage Door Controller uses encrypted wireless signals to communicate with a Z-Wave network. Gen5 uses the same level of encryption as banks; AES 128-bit.

Z-Wave network.
The wireless technology used defines how susceptible a device is to attack. Garage Door Controller uses Z-Wave Plus, and avoids WiFi and open communication frequencies commonly used by criminals.

Safe garage door.

Garage Door Controller doesn’t just keep your garage safe from intruders, it keeps your loved ones and property safe from the garage dooritself. Garage Door Controller meets all the regulations of UL325, the safety standard that defines how professional garage door motors should operate. With its own safety features and warning systems built in, Garage Door Controller isn’t just compliant with UL325’s stringent requirements – it also never overrides the basic safety functions that your door already offers.

Visual warnings.
Garage Door Controller indicates when your garage door is about to open or close with visual warnings. Inbuilt within its push button are 8 different LEDs that’ll flash for X seconds before your garage door or gate moves.

Audio warnings.
In the event that the visual warnings are missed or can’t be seen, Garage Door Controller also offers a speaker system rated to 105dB. Preloaded with tones, and with the ability to upload your own MP3s, Garage Door Controller will also sound for X seconds before your garage door or gate moves.

Simple to install

Security. Safety. Simplicity. The 3 foundations for Garage Door Controller.

Despite just how powerful it is, Garage Door Controller is easy to install. The main controller connects to your garage door’s motor in minutes using the provided connection cables;

Screw the back mount plate in place

Connect to existing motor via two cables

Lock to back mount plate by twisting

And the tilt sensor connects to your garage door just as fast;

Remove battery tab 
to power on

Affix mount plate by 
screws/tape.

Lock to mount plate 
by pressing

All the accessories you need.

Garage Door Controller ships with everything you need to make your existing garage or gate controller a part of your connected-home. From the cables you need to connect it to a motor, to the USB cable you can use to optionally change its MP3 tones, Garage Door Controller is the complete package.

Power supply:
Power your Garage Door Controller with only 5 volts.


USB cable:
Upload up to 100 different alerts to your controller via USB.

Cable and clips:
Simply connect the controller to your motor via its dry input / output interface.

Mounting accessories:
Simple mount the controller to a wall using the provided mounting plate and screws.

The best door controller.
The best Z-Wave.

Wireless range

The better the wireless range, the more reliable the product, and Multi Sensor 6 offers a class-leading antenna. Optimised for reliability, this tiny sensor can wireless communicate over 150 metres / 492 feet.

Gen5

The best antenna. The best Z-Wave. Multi  Sensor 6 is built upon Z-Wave Plus and Aeotec’s leading Gen5 technology to offer you the fastest response times and optimal battery life between recharges.

Secure security

If you’re using a sensor for security you want its communication to be secure. That’s why Multi  Sensor 6 utilises AES-128 wireless data encryption to keep it secure from prying eyes and hackers.

Wireless updates.

Whether used for home intelligence or security, you want your sensor to always stay up to date. Whenever firmware udpdates are made for it, you’ll be able to upgrade Multi  Sensor 6 via Microsoft Windows or select Z-Wave gateways.

Technical Specification

  • MODEL NUMBER
    • ZW062
  • HARDWARE
    • Z-Wave Chip 500 series
  • COMMUNICATION PROTOCOLS
    • Z-Wave Plus
  • DIMENSIONS
    • 42.5 x 38.25 x 20.3mm ((LxWxH)
  • CERTIFICATIONS
    • FCC, DEKRA, Z-Wave
  • POWER SUPPLY
    • Input:  5V DC Adapter for Garage Door Controller. CR2 Lithium battery 3V, 800mA for Sensor
  • MAX ALARM POWER
    • 2W
  • MAX VOLUME
    • 105dB
  • POWER CONSUMPTION
    • up to 1W
  • RADIO SIGNAL POWER
    • up to 1mW
  • RANGE
    •  up to 300m (outdoors) and 150m (indoors)
  • OPERATIONAL TEMPERATURE
    • -10-45°C
  • STORAGE TEMPERATURE
    • -10-70°C
  • SUPPORTED AUDIO FORMATS
    • MP3 within 320 Kbps or WAV at 1411 Kbps

Package content

  • Garage Door Controller. 
  • Sensor. 
  • 5V DC Adapter. 
  • USB Cable. 
  • Switch Cable (x2). 
  • Screw (x6). 
  • Back Mount Plate. 
  • Fast Wiring Clip (x2).
  • Double-Sided tape

Additional Info

Z-Wave Association Capabilities

Model: Garage Door Controller Gen5 (ZW062-C)

Z-Wave Certification Number: ZC10-15090012


Group ID

Maximum Nodes

Description

1 5 Group 1 is assigned to the Lifeline association group and every device has 5 nodes to associate. When the Garage Door controller is received the commands sent by controller to be turned on or off, the Garage Door controller will send a basic report of its status to the nodes in association group 1. To change what kind of signal is sent to the nodes in group 1, please see the detailed description of configuration parameter 80.
2 5 When the Garage Door Controller receives the Basic Set, Switch Binary Set,commands from main controller. it will forward the Basic Set, Switch Binary Set to associated nodes in Group 2.

Z-Wave Configuration Capabilities

Model: Garage Door Controller Gen5 (ZW062-C)

Z-Wave Certification Number: ZC10-15090012


Parameter Number

Parameter Size

Parameter Name

Parameter Values

241 4 Pair the Sensor with Garage Door Controller 1431655681 Start the Sensor pairing mode.

Parameter Number

Parameter Size

Parameter Name

Parameter Values

252 1 Enable/Disable Lock Configuration 0
(Default)
All configuration parameters are configurable.
  1 All configuration parameters are not configurable (Locked).

Parameter Number

Parameter Size

Parameter Name

Parameter Values

255 4 Reset to default factory setting 1 Reset all configuration parameters to default setting.
  1431655765 Reset the product to default factory setting and be excluded from the Z-wave network.

Parameter Number

Parameter Size

Parameter Name

Parameter Values

32 1 Configure the default startup ringtone. 0 Disable the startup ringtone.
  1 to 100
(Default)
Enable and select a startup ringtone for the Garage Door Controller.

Parameter Number

Parameter Size

Parameter Name

Parameter Values

34 1 Calibration the Sensor. 1 Enable calibration.

Parameter Number

Parameter Size

Parameter Name

Parameter Values

35 2 Set the timeout of Sensor calibration. 1 to 32767
(Default)
Set the timeout of calibration

Parameter Number

Parameter Size

Parameter Name

Parameter Values

36 1 Get the number of alarm music. 1
(Default)
Get the number of alarm music.

Parameter Number

Parameter Size

Parameter Name

Parameter Values

37 4 Configure the alarm mode when the garage door is opening. 1 to 10 Configure the flash frequency of the alarm LED, there are 10 levels can be set.
  16777215 Disable the alarm mode.
  65535 to 65545 Configure the volume of alarm sound, there are 10 levels can be set.
  256 to 356 Select an alarm sound, there are 4 alarm sounds in the flash memory card can be selected.
  16777216 Enable the alarm mode.

Parameter Number

Parameter Size

Parameter Name

Parameter Values

38 4 Configure the alarm mode when the garage door is closing. 16777216 Enable the alarm mode.
  1 to 10 Configure the flash frequency of the alarm LED, there are 10 levels can be set.
  65535 to 65545 Configure the volume of alarm sound, there are 10 levels can be set.
  16777215 Disable the alarm mode.
  256 to 356 Select an alarm sound, there are 4 alarm sounds in the flash memory card can be selected.

Parameter Number

Parameter Size

Parameter Name

Parameter Values

39 4 Configure the alarm mode when the garage door is in Unknown position. 1 to 10 Configure the flash frequency of the alarm LED, there are 10 levels can be set.
  65535 to 65545 Configure the volume of alarm sound, there are 10 levels can be set.
  16777215 Disable the alarm mode.
  16777216 Enable the alarm mode.
  256 to 356 Select an alarm sound, there are 4 alarm sounds in the flash memory card can be selected.

Parameter Number

Parameter Size

Parameter Name

Parameter Values

40 4 Configure the alarm mode when the garage door is in closed position. 16777216 Enable the alarm mode.
  1 to 10 Configure the flash frequency of the alarm LED, there are 10 levels can be set.
  256 to 356 Select an alarm sound, there are 4 alarm sounds in the flash memory card can be selected.
  65535 to 65545 Configure the volume of alarm sound, there are 10 levels can be set.
  16777215 Disable the alarm mode.

Parameter Number

Parameter Size

Parameter Name

Parameter Values

41 1 Configuration report for the tamper switch State 0
(Default)
The Sensor is installed on the garage door.
  15 The Sensor is removed from the garage door.

Parameter Number

Parameter Size

Parameter Name

Parameter Values

42 1 Configuration report for the battery state of Sensor 15 Battery is in low battery state.
  0
(Default)
Battery is in normal state.

Parameter Number

Parameter Size

Parameter Name

Parameter Values

43 1 Start playing or Stop playing the ringtone. -1 Stop playing the ringtone.
  1 to 100 Start playing the ringtone that you select.

Parameter Number

Parameter Size

Parameter Name

Parameter Values

44 1 Test the volume of the current ringtone 1 to 10 There are 10 volume levels can be set for testing.

Parameter Number

Parameter Size

Parameter Name

Parameter Values

45 2 Get the environment temperature 0 to 500
(Default)
The available temperature range is 0 to 50 Celsius

Parameter Number

Parameter Size

Parameter Name

Parameter Values

47 1 Define the function of Button- and Button+. 1 Pressing it once, the Button+ and Button- are defined to be the control item of Next and Previous. Press and hold it, the Button+ and Button- are defined to be used to increase and decrease the volume.
  0
(Default)
Pressing it once, the Button+ and Button- are defined to be used to increase and decrease the volume. Press and hold it, the Button+ and Button- are defined to be the control item of Next and Previous.

Parameter Number

Parameter Size

Parameter Name

Parameter Values

80 1 Enable/Disable to send notifications to associated devices to associated devices. 2
(Default)
Send BARRIER OPERATOR Report Command
  0 Send Nothing (Disabled)
  1 Send HAIL Command

Z-Wave Command Classes

Model: Garage Door Controller Gen5 (ZW062-C)

Z-Wave Certification Number: ZC10-15090012


Supported Command Classes
 
        Application Status
        Association
        Association Group Information
        Barrier Operator
        Basic
        Configuration
        Device Reset Local
        Firmware Update Meta Data
        Manufacturer Specific
        Notification
        Powerlevel
        Security
        Switch Binary
        Version
        ZWavePlus Info
 
 
Controlled Command Classes
 
        Basic
        Hail
        Switch Binary

User manual

Guides

  • Guides
More Information
EAN No
Technology Z-Wave+
Z-Wave Plus: N/A
Security S2 Classes N/A
Z-Wave Hardware Platform ZM5101
Z-Wave Library Type Enhanced 232 Slave
Z-Wave Device Type Secure Barrier Add-On
Z-Wave Role Type Always On Slave
Frequency N/A
Внутренняя/наружная установка Outdoor
Manufacturer Aeotec
Association groups 2
Z-Wave Features N/A
Blind features N/A
Switch/Control Type N/A
Power source Power supply DC, Battery
Maximu Load No
Battery Type CR2 3V
Form factor Wall Mounted
Usage Compliment Core System, Lock and Monitor Doors
OTA Firmware Updating Yes
Write Your Own Review
You're reviewing:Z-Wave Plus Aeotec Garage Door Controller
Your Rating
Copyright © 2016 Swinestudio. All rights reserved.