Z-Wave Plus TKB Home Single Paddle Wall Switch TZ36S
Single Paddle Wall Switch to control lights and Z-Wave devices.
- Sleek design to fit in with the contemporary home
- Able to switch one electrical load with max. 1380 watts
- LED indicator to easily locate it in a dark room
- On/Off function
The TKB Single Paddle Wall Dimmer TZ35S - Gen5 is a switch that has one relay module integrated. The wall switch has a single paddle and it is able to switch one electrical load with max. 1380 watts. With the switch paddle or Z-Wave system you can control the connected electrical load.
The switch can easily be included and controlled in a Z-Wave network by a remote control or your home automation Z-Wave controller. It's discoverable within a range of 30 metres from your wireless controller. The switch is equipped with a LED indicator to easily locate it in a dark room.
The group 1 allow dimming and brightening of Z-Wave dimmers if associated.
The wall switch can be easily connected to a electrical load without installing a flush mounted module separately. The relay is located inside a module, which is directly connected to the wall switch with the paddle. With the TKB Home wall switch you can replace any switch insert or toggle switch. The wall switch can be mounted on any flush box.
With the TKB Single Paddle wall switch you can easily make your installed light smart and connected. The wall switches can be connected to every Z-Wave system and automation of your lamps and lights has never been easier than before.
- Z-Wave Chip 500 series
- COMMUNICATION PROTOCOLS
- Z-Wave Plus
- MAXIMUM LOAD
- AC 220V-240V: L1<1380W
- Z-WAVE GROUPS
- Two groups and five devices each (nodes)
- Packing size:80x80x50 mm (LxWxH)
- Base size:
- Dimension front: 80x80 mm (LxW)
- Dimension back: 24x50 mm (LxW)
- CE, Z-Wave
- POWER SUPPLY INPUT
- Input: AC 220V-240VAC, 50-60Hz
- POWER CONSUMPTION
- up to 0.5W
- RADIO SIGNAL POWER
- up to 1mW
- up to 50m (outdoors) and 40m (indoors)
- OPERATIONAL TEMPERATURE
- OPERATIONAL HUMIDITY
- 8% - 80%
- IP CODE
- FOR INSTALLATION IN BOXES
- D ≥ 50mm, depth ≥ 60mm
- User manual
|Z-Wave Hardware Platform||ZM5101|
|Z-Wave Library Type||Enhanced 232 Slave|
|Z-Wave Device Type||On/Off Power Switch|
|Z-Wave Role Type||Always On Slave|
|Type of dimmer and switch||wall switch|
|Power source||Cable AC|
|Type of wire system||3-Wire|
|Touch control options||Single click|
|OTA Firmware Updating||No|
|Form factor||Wall Mounted|