Z-Wave Plus NEO Electronics Flood Sensor
- When alarm triggered, LED light flashes in the detection area.
- Easily install with screws or sticker .
- Detecting the location of the overflow timely and accurately, reduce the economic losses caused by the overflow of water.
- Compatible with any Z-Wave main controller.
- High sensitivity and good stability.
Water sensor is an intelligent security equipment that can transmit the Z-Wave network which has particular frequency. Different countries or areas, the radio frequency of Z-Wave is different. In the Z-Wave network communications, water sensor can work with any Z-Wave main controller. In the Z-Wave network communications, water sensor can send messages to the Z-Wave main controller, and realize association with other devices through the Z-Wave network. In the communication with the Z-Wave main controller, the water sensor can send messages to the Z-Wave main controller, but it can not receive messages from the Z-Wave main controller. When the water sensor is triggered, the LED light keeps on and the buzzer will make sound. The water sensor sends messages to the Z-Wave main controller at the same time, the Z-Wave main controller will display the current status of water sensor. Water sensor is battery powered, is small and can be installed easily.
The better the wireless range, the more reliable the product, and Motion Sensor offers a class-leading antenna. Optimised for reliability, this tiny sensor can wireless communicate over 150 metres / 492 feet.
The best antenna. The best Z-Wave. Motion Sensor is built upon Z-Wave Plus and Gen5 technology to offer you the fastest response times and optimal battery life between recharges.
If you’re using a sensor for security you want its communication to be secure. That’s why Motion Sensor utilises AES-128 wireless data encryption to keep it secure from prying eyes and hackers.
Whether used for home intelligence or security, you want your sensor to always stay up to date. Whenever firmware udpdates are made for it, you’ll be able to upgrade Motion Sensor via Microsoft Windows or select Z-Wave gateways.
- MODEL NUMBER
- Z-Wave Chip 500 series
- COMMUNICATION PROTOCOLS
- Z-Wave Plus
- Z-WAVE GROUPS
- Three groups and five devices (nodes)
- Packing size: (LxWxH)
- Base size: 68mm x 68mm x 34mm (LxWxH)
- CE, Z-Wave
- POWER SUPPLY
- CR14250 x 1
- POWER CONSUMPTION
- up to 1W
- RADIO SIGNAL POWER
- up to 1mW
- up to 150m (outdoors) and 100m (indoors)
- OPERATIONAL TEMPERATURE RANGE
- OPERATIONAL HUMIDITY:
- IP CODE
- Water sensor
- Screw (x2)
- Screw stopper (x2)
- User manual
|Security S2 Classes||No|
|Z-Wave Hardware Platform||ZM5202|
|Z-Wave Library Type||Routing slave|
|Z-Wave Device Type||Notification Sensor|
|Z-Wave Role Type||Reporting Sleeping Slave|
|Type of sensor||motion|
|OTA Firmware Updating||No|