Z-Wave Plus TKB Home Single Paddle Wall Dimmer TZ55S
Single Paddle Wall Dimmer to control lights and Z-Wave devices.
- Sleek design to fit in with the contemporary home
- Able to switch one electrical load with max. 300 watts
- LED indicator to easily locate it in a dark room
- Dimmer function
The TKB Single Paddle Wall Dimmer TZ55S - Gen5 is a wall switch that has a dimmer module integrated. The wall switch has one switching paddle and it is able to switch one electrical load with up to 300 watts. With the swithc paddle you can control the connected electrical load.
The wall switch can be easily connected to an electrical load without installing a flush mounted module separately. The dimmer is located inside a module, which is directly connected to the wall switch with the paddle. With the TKB Home wall dimmer switch you can replace any switch insert or toggle switch. The wall switch can be mounted on any flush box.
The switch can easily be included and controlled in a Z-Wave network by a remote control or your home automation Z-Wave controller. It's discoverable within a range of 30 metres from your wireless controller. The switch is equipped with a LED indicator to easily locate it in a dark room.
With the TKB Dimmer Wall Switch you can easily make your installed light smart and connected. The wall switches can be connected to every Z-Wave system and automation of your lamps and lights has never been easier than before.
Note: The dimmer has been designed to hold up to a maximum load of 1.3 Amps (300 watts) and works with a 3-Wire system. Please check your installation before purchasing. Further information about 2-wire and 3-wire installations is available in Wiki - Understanding 2-wire and 3-wire Lighting Systems.
- Z-Wave Chip 500 series
- COMMUNICATION PROTOCOLS
- Z-Wave Plus
- MAXIMUM LOAD
- AC 220V-240V: L1<300W
- Z-WAVE GROUPS
- Two groups and five devices each (nodes)
- Packing size:80x80x50 mm (LxWxH)
- Base size:
- Dimension front: 86x86 mm (LxW)
- Dimension back: 24x50 mm (LxW)
- CE, Z-Wave
- POWER SUPPLY INPUT
- Input: AC 220V-240VAC, 50-60Hz
- POWER CONSUMPTION
- up to 0.5W
- RADIO SIGNAL POWER
- up to 1mW
- up to 50m (outdoors) and 40m (indoors)
- OPERATIONAL TEMPERATURE
- OPERATIONAL HUMIDITY
- 8% - 80%
- IP CODE
- FOR INSTALLATION IN BOXES
- D ≥ 50mm, depth ≥ 60mm
- User manual
|Security S2 Classes||N/A|
|Z-Wave Hardware Platform||ZM5101|
|Z-Wave Library Type||Enhanced 232 Slave|
|Z-Wave Device Type||On/Off Power Switch|
|Z-Wave Role Type||Always On Slave|
|Type of dimmer and switch||wall switch|
|Power source||Cable AC|
|Type of wire system||3-Wire|
|Wall switch feature||Double Click|
|Touch control options||Single click|
|OTA Firmware Updating||No|
|Form factor||Wall Mounted|