Z-Wave Remotec AC IR Extender

In stock
As low as $82.34

Translates Z-Wave thermostat commands to Air-conditioning IR control codes.

  • Enables control of air-conditioning (AC) unit via the Z-Wave network
  • Five built-in directional IR emitters
  • Supports external IR emitters (optional)
  • In-built ACIR code library
  • Temperature sensor enables remote monitoring of room temperature

Air Conditioneer control

The ZXT‐120 is a Z‐Wave to IR extender for air‐conditioner (AC), it works with any Z‐Wave compliant gateway or controller by translating Z‐Wave Thermostat Commands to AC IR control code.
User can select the IR code from the built‐in code library of ZXT‐120, or use learning function, by using Z‐Wave Configuration Commands according to the parameter table. ZXT‐120 is also with built‐in temperature sensor which allows gateway or controller to get the current room temperature.

Controller and Gateway Requirements

The ZXT‐120 can work with any Z‐Wave compliant controller or gateway supporting the following Z‐Wave commands.

  • Configuration Command Class
  • Multilevel Sensor Command Class
  • Thermostat Command Class

Built‐in IR code library

The Built‐in IR code library supports most of the popular air conditioner brands in the market. Z‐Wave gateway and controller does not need to have any IR control code knowledge. User can use ZWave controller or gateway to select the IR code according to the ZXT‐120 code list separately provided through Z‐Wave configuration command.

Supports following AC manufacturers:

  • Acura
  • Apton
  • Carrier
  • ChangHong
  • Chigo
  • Chunlan
  • Daikin
  • Electrolux
  • Fujitsu
  • Galanz
  • General
  • Gree
  • Haier
  • Hisense
  • Hitachi
  • Kang Li
  • Kelon
  • Kelvinator
  • Kolin
  • Konka
  • LG
  • Midea
  • Mitsubishi Electric
  • Mitsubishi Heavy Industries
  • Panasonic
  • Panda
  • Philco
  • Samsung
  • Sanyo
  • Sharp
  • Shinco
  • Siemens
  • TCL
  • Toshiba
  • Trane
  • Valtas
  • York

Technical Specification

    • Z-Wave Chip 300 series
    • 5 directional IR emitters (hemispherical coverage)
    • 3.5mm jack for external wired IR emitter (optional)
    • Supports wide-range of carrier frequency (15 to 455kHz)
    • AC IR code library
    • IR learning: Max. 23 commands
    • Z-Wave
    • Measurable range : 32 – 104 °F / 0 – 40 °C
    • Report resolution: 1 degree C
    • Packing size:50x50x80 mm (LxWxH)
    • Base size:70x18 mm (DxH)(Main unit) / 70x15.5 mm (DxH)(Battery chassis)
    • CE, Z-Wave
    • Input: USB Power DC 5V 100mA or Dry battery AAA x 3pcs
    • up to 1.6W
    • up to 0.8mW
    • RF operating distance: up to 80ft outdoor line of sight, in unobstructed environment
    • IR operating distance: up to 25ft line of sight, in unobstructed environment
    • 0-40°C
    • IP20
    • 35g (Battery chassis excluded)
    • 60g (Battery chassis included)
    • 90g (Main + Battery chassis + AAA x3pcs)

Package content

  • ZXT‐120 (Z‐Wave‐to‐AC IR Extender)
  • Screws (bottom cover) x 2pcs
  • ZXT‐120 User Manual (download from our website)
  • AC Code List (download from our website)

Additional Info

Z-Wave Command Classes

Model: Remotec ZXT-120EU AC Extender (BW8377EU)

Z-Wave Certification Number: ZC08-12090012

Supported Command Classes
        All Switch
        Manufacturer Specific
        Multilevel Sensor
        Thermostat Fan
        Thermostat Mode
        Thermostat Setpoint

User manual


  • Guides
More Information
Z-Wave Plus: No
Z-Wave Hardware Platform ZM3102
Z-Wave Library Type Routing slave
Z-Wave Device Type Thermostat
Z-Wave Role Type Thermostat General V2
Technology Z-Wave, IR
Translate Z-Wave To Z-Wave To IR
Manufacturer Remotec
Power source Power supply DC, Battery
Battery Type AAA
Mounting type Wall, Table
OTA Firmware Updating No
Usage Manage Heating
Write Your Own Review
You're reviewing:Z-Wave Remotec AC IR Extender
Your Rating
Copyright © 2016 Swinestudio. All rights reserved.